Slim DVD RW
Quick Install Guide
Box Content
1. Primary USB 2.0 A plug (signal and power)
2. Secondary USB 2.0 A plug (power only)
3. Mini-USB plug
Note: Please find the User Manual on the CD.
Protect your investment – register for free
Setup Steps
1. Connect the primary USB 2.0 A plug (without
the lightning bolt sticker) to your computer.
2. Your drive is ready to use.
Windows users: Right click My Computer and select
Properties>General. Your drive should be listed.
Mac users: In the Apple menu, choose About This
Mac, then More Info. This will open the Apple
System Profiler. Your drive should be listed under the
Hardware category.
NOTE: Your drive must be connected to a USB 2.0
port. Performance is not guaranteed using USB 1.1.
NOTE: The Y cable has a secondary USB 2.0 A
plug for additional power. Attaching the primary A
plug to most computers will provide ample signal
and power for the LaCie Slim DVD RW. In the event
that the device does not receive enough power, you
may connect the additional A plug into a second
USB 2.0 port on your computer. Please note that the
secondary plug has a lightning bolt sticker.
See the User Manual for more information.
|